INSTRUCTIONS FOR USE: To ensure proper operation of the delivery set, please follow all instructions and illustrations below.
- Fill feeding bag to desired level and close cap securely.
- Unscrew the protective cover counterclockwise from the ENFit connector (image A).
Note: If set is to be used with a carry pack, all air must be removed from the bag and tubing. Continue to step #3 for instructions on removing the air. If set is to be hung above pump, i.e. on an IV pole, air may remain in bag. Skip to step #4.
- Turn bag upside down and gently squeeze. Tilt bag to keep air at the tubing port (image B). At the same time, follow the instructions in step #4.
- Gently pinch the teal colored tubing below the “ ” symbol (image C). Hold this position until air is expelled from tubing. Gently squeeze bag at the same time to assist fluid flow. If fluid does not flow, pinch may be too tight.
- To expel air from tube using pump prime feature, refer to pump and Operator’s Manual for instructions.
Note: Priming with the pump is recommended when using thick formulas because it is faster than priming by gravity.
- Position silicone tubing around pump wheel stretching lightly. Seat cassette into the pump (image D). Close pump door.
- Screw the ENFit connector clockwise into feeding tube firmly by hand (image E). Be careful not to overtighten